Pre-recording before recording starts
Input signals can be captured for up to 2 seconds before recording is started (pre-recording). Setting this in
advance can be useful when a performance starts suddenly, for example.
1.
Press
so that it lights.
This opens the RECORDER screen.
2.
Press
so that it lights.
This opens the SETTING screen.
3.
Use
to select REC/PLAY > PRE REC.
4.
Turn
to select ON, and press
NOTE
• This function cannot be used with the AUTO REC, METRONOME, PRE COUNT or OVERDUB functions.
• When AUTO REC or PRE COUNT is turned on, PRE REC will be disabled.
• The PRE REC function continues to be enabled even when recording is paused.
.
50
Display
Selection encoder
SETTING button
RECORDER mode button