█ EFFECT mode
① Effect type buttons
The currently selected effect type appears lit.
Press a button to change the effect. The selected effect will be shown on the display. Its parameters can be
changed using the Selection encoder.
( →
"Send effect specifications" on page
No.
Item
① Effect type
② Parameter
③ Parameter knob
④ Parameter setting value
⑤
Remaining battery charge
(when battery-powered)
111)
①
②
③
④
⑤
This shows the selected effect type.
This shows the name of an adjustable effect parameter.
This shows a parameter knob.
The knob position shows the parameter setting value.
This shows the parameter setting value.
It appears highlighted when selected.
This shows the remaining battery charge. When the remaining battery charge
becomes low, replace the batteries or connect an AC adapter.
① Effect type buttons
Explanation
15