Finding A Passage Within A Track; Selecting A Desired Album/Track (Mp3 Disc Only); Different Play Modes: Shuffle And Repeat; Programming The Disc Tracks - Philips MCM726/12 User Manual

Finding a passage within a track

1
Press and hold down on TUNING S/T
( S/T on the remote control).
➜
The disc is played at high speed.
2
When you recognize the passage you want,
release TUNING S/T (
remote control).
➜
Normal playback continues.
Selecting a desired album/track
To select a desired album (MP3 disc only)
● Press ALBUM/PRESET 4/3 repeatedly.
To select a desired track
● Press TUNING S/T (
remote control) repeatedly.
Different play modes: SHUFFLE
and REPEAT
You can select and change the various play
modes before or during playback..
1
Press REPEAT and SHUFFLE on the remote
control to select :
➜
SHUF – tracks of the entire disc/
programme are played in random order.
➜
SHUF REP ALL – to repeat the entire
disc/ programme continuously in random order.
➜
REP ALL – to repeat the entire disc/
programme.
➜
REP – to repeat the current track.
2
To return to normal playback, press REPEAT
and SHUFFLE until the various SHUFFLE/
REPEAT modes are no longer displayed.
● You can also press 9 to cancel your play mode.
Note:
If Shuffle is activated on a MP3-CD, all titles stored
in the disc will be played in random order.
1
on the
S/T
2
●
3
S/T on the
4
5
●
●
CD/MP3-CD Operations

Programming the disc tracks

Programming tracks is possible when playback is
stopped. Up to 20 tracks can be stored in the
memory in any order.
Press PROGRAM to enter the programming
mode.
➜
A track number is shown and PROG flashes.
Press TUNING S/T (
remote control) repeatedly to select your
desired track number.
For MP3 disc, press ALBUM/PRESET 4/3
and TUNING S/T (
remote control) to select the desired album and
track for programming.
Press PROGRAM to confirm the track number
to be stored.
Repeat steps 2-3 to select and store all desired
tracks.
To start playback of your disc programme, press
Ç followed byÉÅ.
➜ PROG -- -- OK is displayed briefly.
If you attempt to programme more than
20 tracks, "FULL" will appear on the
display. In this case :
➜
The system will exit programming mode
automatically.
➜
Pressing Ç button will erase all the
programmed tracks.
➜
Pressing ÉÅ button will start playback of
the programmed tracks.

Reviewing the programme

In stop mode, press and hold PROGRAM until
the display shows all your stored track numbers
in sequence.

Erasing the programme

Press Ç once when playback is stopped or
twice during playback.
➜
PROG disappears and "CLEAR" is displayed.
on the
S/T
on the
S/T
15