Other Features; Set The Alarm Timer; Set The Sleep Timer; Listen To An Audio Device - Philips MCD170/12 User Manual

10 Other features

Set the alarm timer

This unit can be used as an alarm clock. The
DISC, TUNER or USB is activated to play at a
preset time.
1
Ensure that you have set the clock
correctly.
2
In standby mode, press and hold TIMER .
3
Press DISC , TUNER or USB to select a
source.
4
Press TIMER to confi rm.
»
The hour digits are displayed and begin
to blink.
5
Press / to set the hour.
6
Press TIMER to confi rm.
»
The minute digits are displayed and
begin to blink.
7
Press / to set the minute.
8
Press TIMER to confi rm.
»
The timer is set and activated.
Activate and deactivate alarm timer
1
Press TIMER repeatedly to activate or
deactivate timer.
»
If timer is activated, the display shows
.
»
If timer is deactivated,
the display.
Note
•
Alarm timer is not available in MP3 LINK mode.
•
If DISC/USB source is selected and the track cannot
be played, tuner is activated automatically.

Set the sleep timer

This DVD Micro Theater can switch to standby
automatically after a set period of time.
1
To deactivate sleep timer
1

Listen to an audio device

You can listen to an audio device through this
DVD Micro Theater.
1
2
3
disappears on
When the DVD Micro Theater is turned
on, press SLEEP repeatedly to select a set
period of time (in minutes).
»
When sleep timer is activated, the
display shows
.
Press SLEEP repeatedly until " [OFF] " is
displayed.
»
When sleep timer is deactivated,
disappears on the display.
Connect a 3.5mm audio cable (not
supplied) from the MP3 LINK socket to
the audio output socket audio device.
Press MP3 Link .
Start to play the device (see the device
user manual).
EN 27