Load The Ipod/Iphone/Ipad; Play Audio From The Ipod/Iphone/Ipad; Charge The Ipod/Iphone/Ipad; Remove The Ipod/Iphone/Ipad - Philips dcd8000 User Manual

Load the iPod/iPhone/iPad

1
Lift up the iPod/iPhone/iPad dock on the
top panel until you hear a click.
2
Place the iPod/iPhone/iPad in the dock.
Play audio from the iPod/
iPhone/iPad
1
Make sure that your iPod/iPhone/iPad has
been loaded securely.
2
Press DOCK to select the iPod/iPhone/iPad source.
3
Play audio on your iPod/iPhone/iPad.
• To pause/resume play, press
• To skip to a track, press
• To navigate the menu: press
to access the menu, press
an item, and then press OK to confirm.

Charge the iPod/iPhone/iPad

When the unit is connected to power, the
docked iPod/iPhone/iPad begins to charge.

Remove the iPod/iPhone/iPad

1
Pull the iPod/iPhone/iPad out of the dock.
2
Press down to hide the dock.
22 EN

7 Listen to radio

The unit can automatically search and store
radio stations (see "Get started" > "Store radio
stations automatically"). You can also search and
store radio stations manually.

Tune to a radio station

1
2
3
• [STEREO] is the default setting for tuner
mode.
•
In tuner mode, you can press
to switch between [STEREO] and [MONO].
The unit memorizes your setting even if you
turn off the unit or turn to other sources.
.
/ .
Program radio stations
BACK
/ to select automatically
•
You can program a maximum of 20 preset
radio stations.
1
Press RADIO.
Press and hold /
seconds.
»
The radio tunes to a station with
strong reception automatically.
Repeat step 2 to tune to more stations.
• To tune to a weak station, press
repeatedly until you find optimal
reception.
Tip
Note
Press and hold PROGRAM for 2 seconds
to activate automatic programming.
» [AUTO] (auto) is displayed briefly.
»
All available stations are programmed in
the order of waveband reception strength.
»
The first programed radio station is
broadcast automatically.
for more than 2
/
OK repeatedly