Using Smart Device Application - Navien Mate EQM 580 User Manual

Using Smart Device Application.

If you install "Navien Mate" App and connect to your device via Wi-Fi, you can
control your Navien Mate with the App.
Power On and Off
You can turn the power on and off by touching the power icon after launching the Navien Mate app.
How to set temperature
You can adjust the left and right temperature simultaneously by touching the master temperature
control button on the main screen. On the left side of the app main screen, set the desired temperature
by moving the balloon marked with the temperature on the left / right side of the screen and touch the
Save button to complete the setting. Touch the Save button to complete the setup.
Setting the Timer Mode
Off-schedule
Touch the timer icon on the main screen to display the timer setting window.
Touch the icon beside Off reservation to activate the reservation function and select the desired
time from the time setting menu at the bottom.
Touch the 'Settings' button at the bottom of the setting window to complete the setting.
On-schedule
Touch the timer icon on the main screen to display the timer setting window.
Touch the icon next to the on schedule to activate the reservation function, and then select
the desired start temperature and start time from the time setting menu at the bottom.
Touch the 'Settings' button at the bottom of the setting window to complete the setting.
When signing up for membership, set the time (GMT) through setting your location. You can change the time(GMT)
by pressing [setting] on the upper tab of Application and setting your location.
Location Settings
Set the time (in GMT) at which to place the hot mat. Touch the time (GMT) on the screen to see the time (GMT) list.
Push up or down to set the time (GMT) and touch OK to enter the selection value and touch the Save button,
the time of the hot mat is set.
Setting the Lock Mode(Child lock)
Touch the lock icon on the main screen to set the lock (child lock) function.
When the lock is set, pressing the control panel of the boiler does not operate.
Touch the lock icon on the main screen again to release the lock (child lock) function.
Setting the Mute and Volume
Touch the volum icon on the main screen to display the voice setting window.
The volume can be adjusted in three steps.
When set to mute, the volume icon changes to mute.
Setting the Fast Heating
Touch the fast heating icon on the main screen to set the fast heating mode.
Fast heating will run for 30 minutes.
If you touch the fast heating icon again in quick heating setting, fast heating is canceled.
22