Fujitsu PRIMERGY TX2550 M4 Operating Manual page 64

Starting up and operation
Pos. Label Indicator
AC
6 connected
indicator
iRMC-related status signals
Global error
ID indicator
indicator
blue flashing off
blue flashing orange flashing
64
Status Description
– The server is switched off and
connected to the mains (standby
mode).
– The server has been switched on
but Power Cycle Delay settings
delay it from turning on for a
green on
specified time.
I
– The server is switched off and not
connected to the mains.
off
– The server is switched on and
operating normally.
Description
A remote connection has been
established. Local VGA output has been
disabled during the remote session.
An emergency flash of the iRMC firmware
is in progress.
I
For further information on the
emergency flash of the iRMC
firmware, refer to the "FUJITSU
Server PRIMERGY TX2550 M4
Upgrade and Maintenance
Manual".
Operating Manual
After connecting the server to
the mains, it will take about 60
seconds until the server will
enter standby mode and can be
switched on.
TX2550 M4