Connecting Devices To The Server - Fujitsu PRIMERGY TX2550 M4 Operating Manual

– support systems having a linear alignment feature to ensure that they can
be adjusted to different rack depths
Asymmetrical PRIMECENTER Rack and DataCenter Rack provide an
enhanced cable management in the lateral rack area.
3rd party racks
I
Installation in most current rack systems from other manufacturers
(3rd party racks) is also supported. For details please contact your sales
representative.
5.4

Connecting devices to the server

The connectors for external devices are on the front and rear of the server. The
additional connectors available on your server depend on the expansion cards
installed. For more information, see the "FUJITSU Server PRIMERGY
TX2550 M4 Server Upgrade and Maintenance Manual".
Two additional USB connectors (1) are located on the front of the server
(figure 2 on page
Figure 2: Front side connectors
1 2x USB 3.0 connectors
TX2550 M4
51).
Operating Manual
Hardware installation
51