Measuring Cycle Auxiliary Programs - Siemens SINUMERIK 840 User Manual

10.91
3

Measuring Cycle Auxiliary Programs

Some subroutines are called in the measuring cycles which can also be employed directly by
the user.
Which programs can be used depends on the
machine configuration and can also be partly
(See machine tool manufacturer's specifications)
Cycle Function
L931 Auxiliary cycle for tool or workpiece measuing cycles
L932 Check MDC and transfer parameters
L933 Auxiliary cycle for tool or workpiece measuring cycrles
L934 Auxiliary cycle for tool or workpiece measuring cycles
L935 Measuring result display selection
L936 Measurement abort
L937 Auxiliary cycle for workpiece measuring cycles
L938 Auxiliary cycle for tool or workpiece measuring cycles
L939 Auxiliary cycle for tool measuring cycles
L960 Transfer of ZO data blocks
L961 Additive input of empirical values
L962 Erase program empirical values/average values
L963 Auxiliary cycle for workpiece measuring cycle L979
L964 Auxiliary cycle for workpiece measuring cycles
L973/L976
L965 Measuring plane (tool or workpiece measurement)
L966 Auxiliary program for operator guidance macro
L967 Presetting of transfer parameters
L969 Coordinate rotation
L970 Prepositioning
L971 Auxiliary cycle for tool measuring cycles
L980 Auxiliary cycle for workpiece measuring cycle L981
L988 Auxiliary cycle for workpiece measuring cycles
L989 Auxiliary cycle for workpiece measuring cycle L979
These programs must be available
Additional programs: Facilitate programming and operating.
©
Siemens AG 1990 All Rights Reserved
SINUMERIK 840/850/880 (BN)
determined via MDC.
6FC5197- AB70
3 Measuring Cycle Auxiliary Programs
3–1