Measuring A Surface - Siemens SINUMERIK 840 User Manual

8 Automatic Workpiece Measurement in JOG Mode (SINUMERIK 840 SW2)

8.4.5 Measuring a surface

8.4.5 Measuring a surface
Prog. Para. Sett. Data
JOG
Program reset
Workpiece measurement: Measure surface
M/W
Set dimensions
Measure
The following parameters must be set:
• Set dimension L
• Number of axis along which measurement must be taken
1 ˆ = abscissa
2 ˆ = ordinate
3 ˆ = applicate (drilling axis) (as from Version 3.5)
When you press the softkey "MEASURE", a selection display appears requesting you to
position the probe opposite the surface.
8–20
Data I/O Program.
S
L
©
Siemens AG 1990 All Rights Reserved
08.96
Diagnostic User
Mode grp.: 1
Channel : 1
L R42=
40
R30= 1
6FC5197- AB70
SINUMERIK 840/850/880 (BN)