L973 Calibrating The Workpiece Probe (T); L974 Workpiece Measurement (T) - Siemens SINUMERIK 840 User Manual

08.96
2.7.2

L973 Calibrating the workpiece probe (T)

R23 = 5 4 3 2 1

2.7.3 L974 Workpiece measurement (T)

R23 = 0 1-point measurement (ZO determination)
21 1-point measurement
22 1-point measurement with 180° reversal (workpiece)
23 2-point measurement on diameter:
24 2-point measurement on diameter:
25 Multi-point measurement on circumference
26 Multi-point measurement on cylinder
©
Siemens AG 1990 All Rights Reserved
SINUMERIK 840/850/880 (BN)
2 With arbitrary data in the plane
0 Bore
not in the case of 1-point measurement
2 Surface
0 No calculation of probe ball
1 Calculation of probe ball
0/1 1 axis direction; state measuring axis and axis direction
2 2 axis direction; state measuring axis
0 No position determination
(must be selected when using a probe with 2D numbers
1 Position determination (not in the case of 1-point
measurements)
external measurement with R18/R19
internal measurement without R18/R19
internal measurement only with R18/R19
6FC5197- AB70
2 Defining Parameters
2.7.2 L973 Calibrating the workpiece probe (T)
2–7