AMD Athlon Manual page 63

Hide thumbs Also See for Athlon:

Table of Contents

A Guide to Building a PC with an AMD Athlon™ Processor

22914B/0—September 1999

Step 37.

Verify the 115/230 Setting

Verify the power voltage setting on the back of your power supply. The power voltage

setting is usually visible on a red slide switch on the back of the system.

If the voltage value shown matches the voltage in your area, then proceed to the next

step. Otherwise, slide the switch to the appropriate voltage value using a small bladed

screwdriver.

Notice in Photo 49 the indentation on the slide switch. Use this to change your voltage

setting.

Photo 49. Verify the 115/230 Setting

Table of Contents