AMD Athlon Manual page 36

A Guide to Building a PC with an AMD Athlon™ Processor
22914B/0—September 1999
Step 14. Prepare the Punchout Access Ports
Your motherboard has cable connectors for the keyboard, mouse, serial, and parallel
ports, etc. These connectors are accessed through punchout holes in the case.
Place the motherboard near the punchout access ports in the case and determine
which punchouts you want to remove as shown in Photo 21.
Photo 22 shows a typical punchout being removed with a pair of needlenose pliars.
Photo 21. Locate the Punchout Access Ports
30