AMD Athlon Manual page 55

A Guide to Building a PC with an AMD Athlon™ Processor
22914B/0—September 1999
Step 29. Install the Remaining Power Cables
Depending on your power supply, you will have two or three additional power cables.
Most cables will have large four-prong connectors like the cooling fan, others will have
very small connectors.
The floppy drive uses the very small power connector. Carefully push the cable end
onto the power prongs on the back of the floppy drive. If this power cable has multiple
connectors, connect the remaining large power connector to the hard drive.
Make sure the power connectors are properly seated and firmly attached.
Photo 41. Power Cables Installed
49