Philips HQT562 Manual page 6

ENGLISH
8
C
C
2 Remove the old cutting unit by pulling it
upwards.
3 Place the two lugs of the new cutting unit
into the guiding slots.
4 Push the cutting unit back onto the
appliance until you hear a click.
Environment
The built-in rechargeable battery contains
substances that may pollute the environment.
Remove the rechargeable battery when you
discard the appliance.
Do not throw the battery away with the normal
household waste but hand it in at an official
collection point.
You can also take the appliance to a Philips
service centre, where the staff will be happy to
help you remove the battery and dispose of it in
an environmentally safe way.
1 Disconnect the appliance from the mains
and let the appliance run until the motor
stops.
2 Undo the screw of the base plate on the
rear side of the appliance with a
screwdriver.