Acura MDX SPORT HYBRID 2018 Owner's Manual page 31

VEHICLE CONTROLS
Seat Heaters or Ventilation*
Quickly warm or ventilate the seats when the vehicle is on.
Front Seat Heaters or Ventilation*
Use the On-Demand Multi-Use Display (ODMD) touchscreen to operate the
front seat heaters or ventilation.
OFF: Turn
off heat and
ventilation*.
Select LO, MID, or HI
ventilation level.*
When the vehicle is turned off, the heating or ventilation* setting returns to off
at the next vehicle start. If AUTO is selected, the setting remains in AUTO.
Second-Row Outer Seat Heaters*
Press the seat heater button on the back of the
center console to cycle through settings: HI, MID,
LO, and OFF. Indicators appear for each setting.
WARNING
Heat-induced burns are possible when using seat heaters.
Persons with a diminished ability to sense temperature (e.g., persons with
diabetes, lower-limb nerve damage, or paralysis) or with sensitive skin should
not use the seat heaters.
54 |
ODMD screen
Select to enter the seat
heating or ventilation* screen.
Close the menu
Select LO, MID, or
HI heat level.
AUTO: The
system selects
the best setting
based on ambient
temperature.
*if equipped
Customized Features
You can easily customize many features of your vehicle. The customized settings
are recalled every time you unlock the driver's door with the remote (Driver 1 or
Driver 2). Settings are unique to each remote.
Information Screen
How to Change a Setting
The vehicle must be in Park (P) to select Vehicle Settings. Use the interface dial
to make and enter selections. For models with navigation, see the navigation
manual for most customized features.
1. Press SETTINGS.
2. Select an option.
3. Select a setting option and make your preferred changes.
4. Press BACK to exit out of the menus.
Setting the Clock
On vehicles without navigation, use the interface dial to adjust the time in the
clock display. On vehicles with navigation, the time is automatically set using
GPS signals.
1. Press SETTINGS.
2. Select System Settings.
3. Select Clock Adjustment.
4. Rotate the interface dial to change the hour value. Press the interface dial to
select minutes, and rotate to change the value. Press the interface dial to exit
the screen.
5. Press BACK to exit out of the menus.
VEHICLE CONTROLS
SETTINGS Button
| 55