Acura MDX SPORT HYBRID 2018 Owner's Manual page 27

VEHICLE CONTROLS
Adjusting the Mirrors
Adjust the angle of the mirrors for the best visibility when you are sitting in the
correct driving position.
Automatic Dimming Rearview Mirror
When driving after dark, the automatic dimming
function reduces the glare from headlights behind
you. Power door mirrors also dim.*
The function cancels when the gear is changed to
Reverse (R).
Power Door Mirrors
Adjust the power door mirrors when the vehicle is on.
L/R selector switch: Select the left or right
mirror. After adjusting the mirror, return the
switch to the center position.
Mirror position adjustment switch: Press the
switch left, right, up, or down to move the mirror.
Folding door mirror button: Press to fold the
door mirrors in or out.
Reverse Tilt Door Mirrors
Either side door mirror can tilt downward when
you change the gear to Reverse (R) to improve
visibility on the selected side of the vehicle
when reversing. The mirror returns to its original
position when you change the gear out of
Reverse.
When in Reverse, slide the selector switch to the
left or right side.
46 |
Folding
button
Selector switch
Adjustment switch
Selector Switch
Adjusting the Steering Wheel
The steering wheel height and distance from your body can be adjusted so that you
can comfortably grip the steering wheel in an appropriate driving posture.
Press and hold the adjustment switch to move the
steering wheel in, out, up, or down.
WARNING
Adjusting the steering wheel position while driving may cause you to lose
control of the vehicle and be seriously injured in a crash.
Adjust the steering wheel only when the vehicle is stopped.
Driving Position Memory System
You can store two driver's seat positions (except for power lumbar) and outside mirror
positions with the driving position memory system.
When you unlock and open the driver's door with a remote or keyless access system,
the seat and outside mirrors adjust automatically to one of the two preset positions.
When you enter the vehicle, the driver information interface briefly shows you which
remote transmitter you used to unlock the vehicle.
• DRIVER 1 transmitter is linked to memory button 1.
• DRIVER 2 transmitter is linked to memory button 2.
You can use the buttons on the driver's door to store
two driver's seat positions into memory (except for
power lumbar) when the vehicle is on.
1. Adjust the seat and door mirrors to your
preferred position.
2. Press SET. You will hear a beep and the memory
button indicator will blink.
3. Press and hold memory button 1 or 2. You will
hear two beeps when the memory is set.
Press one of the memory buttons to recall previously
stored positions.
VEHICLE CONTROLS
Adjustment Switch
DRIVER 1 DRIVER 2
Memory Button 1
SET Button Memory Button 2
| 47