Aligning The Print Head - Epson Stylus Scan 2000 User Manual

3. When the
a document to confirm that the head is clean and to reset the
cleaning cycle.
If print quality has not improved after repeating this procedure
four or five times, turn the Stylus Scan off and leave it off
overnight. Then try cleaning the head again.
If the print quality still has not improved, one or both of your ink
cartridges may be old or damaged and may need to be replaced.
To replace an ink cartridge before it is empty, see "Replacing an
Old or Damaged Ink Cartridge" on page 10-11.
If print quality remains a problem after replacing the ink
cartridges, contact your dealer.
Note:
To maintain print quality, EPSON recommends turning on the Stylus
Scan for at least one minute every month.

Aligning the Print Head

If you notice a misalignment of vertical lines, you may be able to
solve this problem from your computer using the Print Head
Alignment utility.
Note:
Do not start the Print Head Alignment utility while printing is in
progress; otherwise your printout may be marred.
For Windows users
1. Make sure A4 or Letter size plain paper is loaded in the paper
feeder.
2. Access the printer software window. If you need instructions,
see "Accessing the printer software" on page 4-2.
11-10
Maintenance
power light stops flashing, print a few lines from
P