When Choosing A Place For The Stylus Scan - Epson Stylus Scan 2000 User Manual

If ink gets on your skin, wash it off with soap and water. If
ink gets into your eyes, flush eyes immediately with water.
Do not shake the ink cartridges. Cartridges may leak if
shaken.
Install the ink cartridge immediately after you remove it from
its package. Leaving the cartridge unpacked for a long time
before use may result in reduced print quality.
Once you install an ink cartridge, do not open the clamp or
remove the cartridge except to replace it with a new one.
Otherwise the cartridge may become unusable.
Do not use an ink cartridge beyond the date printed on the
cartridge carton. For best results, use up the ink cartridges
within six months of installing them.
Do not dismantle the ink cartridges or try to refill them. Doing
so may damage the print head.

When choosing a place for the Stylus Scan

Place the EPSON Stylus Scan on a flat, stable surface that
extends beyond the Stylus Scan base in all directions. The
Stylus Scan will not operate properly if it is tilted or at an
angle.
Avoid places subject to rapid changes in temperature and
humidity. Also, keep the Stylus Scan away from direct
sunlight, strong light, and heat sources.
Avoid places subject to shocks and vibrations.
Leave enough room around the Stylus Scan to allow for
sufficient ventilation.
Place the Stylus Scan near a wall outlet where the plug can be
easily unplugged.
2-4
Safety Instructions