Setting Dial-Up Connection Parameters - Huawei HG635 Quick Start Manual

Home gateway
Table of Contents

Advertisement

Available languages

Available languages

Indicator
State
Green Blinking
Green On
WLAN
Green Blinking
(1 Hz)
Green Blinking
(2 Hz)
Green On
LAN
Green Blinking
Green On
USB
Green Blinking

3 Setting Dial-Up Connection Parameters

The HG635 works in PPP mode by default, and starts to set up a dial-up connection
automatically after starting up, meaning you do not need to install dial-up software or perform
dial-up operations on your computer.
To set up a dial-up connection to access the Internet:
Step 1 Open a browser. In the address box, enter http://192.168.100.1. Press Enter to
access the web management page.
Step 2 Enter the login user name (admin by default) and password (the same as WLAN
Key which printed on the HG635's rear panel). Click Login.
To protect against unauthorized access, change the user name and password after the
first login. For details, see Maintenance Guide.
Step 3 Click Start Wizard to display the Wizard tab.
Step 4 Select Connect automatically, and click Next.
Description
user name and password for Broadband dial-up is
ineffective).
The Internet connection is failure in DHCP mode.
The Internet connection is successfully established
and data is being transmitted
2.4G Wi-Fi connection is set up.
5G Wi-Fi connection is set up.
Both 2.4G &5G Wi-Fi are set up.
The HG635 is connected to a wireless client using the
Wi-Fi Protected Setup (WPS) function.
A wireless client, such as a computer installed with
a wireless network adapter, is connecting to the
HG635 using the WPS function.
This process lasts for no longer than 120 seconds.
The WLAN connection is set up, and data is being
transmitted.
At least one Ethernet port is connected to an Ethernet
device (such as a computer) with a network cable, but
no data is being transmitted.
At least one Ethernet port is connected to an Ethernet
device with a network cable, and data is being
transmitted.
The USB port is connected to an USB device, but
no data is being transmitted.
The USB port is connected to an USB device, and
data is being transmitted.
3

Advertisement

Table of Contents
loading

Table of Contents