One-Touch Recording - Philips DVP620VR/17B Owner's Manual

Progressive scan dvd/vcr player
Hide thumbs Also See for DVP620VR/17B:
Table of Contents

Advertisement

H9620UD_1_47.qx4
04.4.7

34 One-Touch Recording

One-Touch Recording (OTR) lets you set a timed recording 30
minutes to eight hours long of the current TV channel. Before you
begin:
Place the DVD/VCR in VCR mode. Press VCR so the VCR light
appears on the front of the DVD/VCR.
Select a recording speed (SP, SLP) with the SPEED button.
Put a videotape in the cassette compartment. Make sure the
tape's record tab is intact and the tape is long enough to record
the program(s).
1
Press VCR, then press SKIP3
or the Number buttons to select the channel you want
to record.
2
Press RECORD
recording length (30 minutes to eight hours)
appears on the TV screen. Recording will begin. REC
and
will appear on the DVD/VCR's display panel.
OTR (0:30)
SP
Stopping an OTR
To stop an OTR before recording is finished, press STOP C on the
remote control or STOP/EJECT C A (VCR) on the front of the
DVD/VCR.
To cancel the OTR but continue recording, press RECORD
repeatedly until RECORD appears in the upper left corner of the
TV screen.
When an OTR finishes, the DVD/VCR will either switch to DVD
mode or turn itself off. If it changes to DVD mode, press STAND-
BY-ON y to turn it off.
After an OTR,
flashes because the VCR is still on standby for
timer recordings. Press TIMER SET on the remote or STOP/EJECT
C A (VCR) on the DVD/VCR to cancel timer standby and use the
VCR normally again.
11:57 AM
Page 34
3 /CH o o or SKIP
repeatedly until the desired
I
SEARCH
REPEAT REPEAT
SUBTITLE
RETURN
/CH p p
VCR
DISC/VCR
MENU
STOP
TIMER SET
2
SPEED
4
8
I
Helpful Hints
• The remaining recording time will
appear on the display panel during
an OTR. Press DISPLAY to see it on
the TV screen.
• To change the recording length while
an OTR is in progress, press
RECORD I repeatedly.
• You cannot pause an OTR.
• If the preset time for a timer
recording comes up during an OTR,
the OTR has priority.The timer
recording will not take place.
• If the end of the tape is reached
during an OTR, the VCR will stop
recording, eject the tape, and
switch to DVD mode or turn off.
STANDBY-ON
MODE
DISPLAY
AUDIO
A-B
ZOOM
ANGLE
SKIP / CH
TITLE
CLEAR/RESET SLOW
1
VCR/TV
DVD
SYSTEM
MENU
OK
PLAY
PAUSE
MARKER
RECORD
1
2
3
5
6
7
9
0
+10

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dvp620vr/17

Table of Contents