Table of Contents
Advertisement
H9620UD_1_47.qx4
You may access status displays by pressing DISPLAY.The displays
may include the current time, channel, and other information.
1
Press DISPLAY. The COUNT display will appear for five
seconds. After five seconds, only the real-time tape counter
will appear.This counter shows you the elapsed playing
time of the tape (from the point at which the counter was
set to zero).The counter also will appear on the display
4
panel on the front of the DVD/VCR.
STOP
2
Press DISPLAY again. The CLOCK display will appear
for five seconds. After five seconds, only the time will
appear (the clock must be set). (If you are watching TV, the
channel number and the availability of stereo or second
audio will also appear.) The time also will appear on the
display panel on the front of the DVD/VCR.
STOP
SLP
3
Press DISPLAY again to remove all the displays.
04.4.7
11:57 AM
Page 31
SLP
0:12:34
HIFI
5:40 PM
CH 02
STEREO
SAP
VCR Status Displays 31
1-3
SEARCH
MODE
REPEAT REPEAT
SUBTITLE
ZOOM
RETURN
VCR
DISC/VCR
MENU
STOP
TIMER SET
SPEED
4
8
Helpful Hints
• If the channel you select has no
broadcast, the screen will be solid
blue.
• You cannot access a status dis-
play when viewing a still picture,
during slow motion, or during for-
ward and reverse searching.
• Channel numbers appear on the
screen for a few seconds each
time you change channels.
STANDBY-ON
DISPLAY
AUDIO
A-B
ANGLE
SKIP / CH
TITLE
CLEAR/RESET SLOW
VCR/TV
DVD
SYSTEM
MENU
OK
PLAY
PAUSE
MARKER
RECORD
1
2
3
5
6
7
9
0
+10
Advertisement
Table of Contents
