Ddp Control Setting; Country Setting; Nuclias Connect Settings - D-Link NUCLIAS CONNECT DAP-2680 User Manual

Web User Interface
Status
Check the box to enable the DDP control
setting.
Note: To save the new configuration settings to the firmware, click
Configuration > Save and Activate, otherwise click Discard Changes to
delete any setting change.
Select a Country
Choose from drop down list country where
device is located.
Note: To save the new configuration settings to the firmware, click
Configuration > Save and Activate, otherwise click Discard Changes to
delete any setting change.
The Nuclias Connect section is used to create a set of APs on the Internet to be organized into a single group in order to increase ease of
management. Nuclias Connect and AP Array are mutually exclusive functions.
Enable Nuclias Connect Click the drop-down menu to enable or disable
Nuclias Connect.
Note: To save the new configuration settings to the firmware, click
Configuration > Save and Activate, otherwise click Discard Changes to
delete any setting change.
D-Link DAP-2680 User Manual

DDP Control Setting

Country Setting

Nuclias Connect Settings

82