crUisE conTrol
3
2
adjusting the cruising speed
The cruising speed may be changed by
pressing the following repeatedly:
– the 2 switch (SET/-) to reduce the
speed;
– the 3 switch (RES/+) to increase the
speed.
note: press and hold one of the
switches to modify speed by succes-
sive increments.
(3/5)
Exceeding the cruising speed
The cruising speed may be exceeded
at any time by depressing the accelera-
tor pedal.
While it is being exceeded, the cruising
speed flashes on the instrument panel.
Then, release the accelerator pedal:
after a few seconds, the vehicle will
automatically return to its set cruising
speed.
cruising speed cannot be
maintained
When driving down a steep gradient,
the system is unable to maintain the
cruising speed: the stored speed will
flash on the instrument panel informa-
tion display to inform you of this situ-
ation.
If the cruise control is no
longer available (after sev-
eral attempts to activate it),
contact an approved dealer.
cruise
control/speed
limiter with hill Descent
control:
the function may act on the
braking system.
cruise control/speed limiter with-
out hill Descent control:
The function never interacts with the
braking system.
Please note that you must always
keep your feet close to the pedals
in order to react in an emergency.
2.57