Tyre Pressure Monitoring System; Resetting Procedure; Resetting The Standard Level For The Tyre Pressures - Renault ZOE 2020 Vehicle User Manual

TyrE PrEssUrE moniToring sysTEm

1
5
4
If the vehicle is equipped with the func-
tion, this system monitors the tyre pres-
sure.
operating principle
Each wheel (except for the emergency
spare wheel) has a sensor in the infla-
tion valve which periodically measures
the tyre pressure.
The system displays the current pres-
sures on the instrument panel 1 and
alerts the driver in the event of insuffi-
cient pressure.
2.18
resetting the standard level
for the tyre pressures
This should be done:
– when the standard tyre pressure
needs to be changed to adapt to
usage conditions (empty, carrying a
load, motorway driving, etc.);
– after swapping a wheel (however
this practice is not recommended);
– after changing a wheel.
2
It should always be done after checking
the tyre pressure of all four tyres when
cold.
3
Tyre pressures must correspond to the
current usage of the vehicle (empty,
carrying a load, motorway driving, etc.).
Resetting can also be performed
from the multimedia screen. Select
"Vehicle", "Tyre pressure".
(1/3)

resetting procedure

Ignition on, vehicle stopped:
– Repeatedly tap switch 5 as many
– tap switch 2 or switch 3 to access
– press and hold the 4 OK switch to
Reset can take several minutes of driv-
ing.
note: the standard tyre pressure
cannot be less than that recommended
and indicated on the door frame.
times as necessary to reach the ve-
hicle tab;
the tyre pressures reset page. The
message "SET tyre pressure (press
and hold)" appears on the instrument
panel;
launch the reset. The flashing tyres
symbol followed by the message
"Learning Tyre Pressures" indicates
that the reset request for the tyre
pressure has been acknowledged.