Eeprom Sub-Address Switch And Edit - Fujitsu MB2146-450-E Setup Manual

EV BOARD MB2146-450-E V1.3
Chapter 3 EV-board Manual

3.5.2 EEPROM Sub-address Switch and EDIT

In EEPROM mode, the LCD displays the value of a certain sub-address.
Status Data
If you press Up or Down key, the value of sub-address will change.
When you want to change the value of this sub-address, please press Confirm key.
Pressing Left or Right to select a LED Up or Down to change the value.
MCU-AN-500072-E-13 – Page 22