Barrel Disassembly - Samsung WB200F Service Manual

3-2 Barrel Disassembly

1. Remove the six SCREWS.
SCREW
2. Remove the FPCB from the connector as illustrated in "Fig. A".
3. Remove the loop part by slightly move the FPCB as shown in the "Fig.B".
1. Remove the FPCB from the
loop part.
2.Remove the FPCB from the
loop part.
Copyright© 1995-2012 SAMSUNG. All rights reserved.
Fig. 3-24
Remove the FPCB from the connector.
1. Open.
Fig. B
Fig. 3-25
FPCB
Disassembly and reassembly
FPCB
2. Remove.
Fig. A
3-13 3-13