Table of Contents
Advertisement
8-6 FLASH & AWB ADJ
■ Set a limit to the illuminance by the Strobo light to classify the hardware defect.
■ Classify the set that deviates from the specifications by illuminating times and then calculate the flash R, B gain.
■ AWB HIGH item is adjusted simultaneously.
<Adjustment method>
1. Attach an 18% reflective paper in the dark room where the light is blocked.
2. Set up the camera in the dark room.
3. Set the distance between the reflective paper and camera to 50cm.
4. Insert the memory card containing the adjustment file into the camera and then
entering the adjustment mode.
5. Select the
Flash & AWB
6. The adjustment will automatically start.
Compare the reference illumination for 2 illuminations using the flash algorithm, and make a judgment.
By using the average value of the illuminance of 2 times, check the R and B gain to make Pass/No
Pass judgment.
Record the R and B gain to EEPROM during flash process and R, B gain success.
7. When the adjustment is completed, the camera will automatically be turned off.
Copyright© 1995-2012 SAMSUNG. All rights reserved.
Tripod
of adjustment menu.
Reflective paper
50cm
Camera
Fig. 8-9
Adjustment
8-7
Hide quick links:
Advertisement
Table of Contents
