Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Cortex Manuals
  4. Fitness Equipment
  5. BH-8
  6. Owner's manual

Cortex BH-8 Owner's Manual

Preacher bench
Hide thumbs

Advertisement

Quick Links

Download this manual
BN-8 PREACHER
BENCH OWNER'S
MANUAL
Product may vary slightly from the item pictured due to model upgrades
Read all instructions carefully before using this product. Retain this owner's manual for future
reference.
NOTE: This manual may be subject to updates or changes. Up to date manuals are available through our website at www.lifespanfitness.com.au

Advertisement

loading

Related Manuals for Cortex BH-8

Summary of Contents for Cortex BH-8

  • Page 1 BN-8 PREACHER BENCH OWNER’S MANUAL Product may vary slightly from the item pictured due to model upgrades Read all instructions carefully before using this product. Retain this owner’s manual for future reference. NOTE: This manual may be subject to updates or changes. Up to date manuals are available through our website at www.lifespanfitness.com.au...

  • Page 2: Table Of Contents

    TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS CARE INSTRUCTIONS PARTS LIST ASSEMBLY INSTRUCTIONS WARRANTY...

  • Page 3: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS WARNING - Read all instructions before using this product. Please keep this manual with you at all times It is important to read this entire manual before assembling and using the equipment. Safe and effective use can only be achieved if the equipment is assembled, maintained and used properly. Please note: It is your responsibility to ensure that all users of the equipment are informed of all warnings and precautions.

  • Page 4: Care Instructions

    The equipment is not suitable for therapeutic use. CARE INSTRUCTIONS Lubricate moving joints with silicon spray after periods of usage. • Be careful not to damage plastic or metal parts of the machine with heavy or sharp objects. • The machine can be kept clean by wiping it down using dry cloth. •...

  • Page 5: Parts List

    PARTS LIST...

  • Page 6: Assembly Instructions

    ASSEMBLY INSTRUCTIONS NOTE: 1. Gaskets shall be placed at both ends of the bolt (against bolt head and nut), as otherwise stated. 2. The initial assembly is to tighten all bolts and nuts by hand, and to tighten them with wrenches when fully assembled.
  • Page 7 Step 2 1. Install the bottom connection frame (# 7) with the 50mm connection plate (# 8), as shown, and then screw on the nut with the carriage bolts M10 * 70 (# 9) through the bottom connecting frame (# 7). 2.
  • Page 8 Step 3 1. The nut is removed from the bottom connector (# 7), and the bottom frame (# 12) is placed to the end on the connecting frame (# 7), which is fastened with a flat gasket (# 5) and a nut (# 6). 2.
  • Page 9 Step 4 1. According to the diagram, the cushion (# 18) is first installed on the front and rear adjusting frame (# 15) and fixed with the hexagonal bolt M8 x 40 (# 20), Φ8 flat, gasket (# 21) in the head of the disc.

  • Page 10: Warranty

    5. WARRANTY AUSTRALIAN CONSUMER LAW Many of our products come with a guarantee or warranty from the manufacturer. In addition, they come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage.