How To Record From An External Source; Recording From Lp's Or Cassettes - Philips CDR700BK User Manual

How to record from an external source

Recording from LP's or cassettes

Make sure that the turntable or cassette deck is connected
with its analog out connectors to the amplifier/receiver
which is connected to the analog in connectors of your
CD-recorder: connection is ANALOG.
Note: It is not possible to connect a turntable directly to the CD
recorder.
Track increments
For recordings from 'noisy' external analog sources like LP
0
or cassette tapes we strongly recommend to switch Auto
Track to OFF and insert track numbers manually.
Auto Track is default switched on. If you wish to switch
0
Auto Track off or on:
1
Press STORE/MENU.
TEXT EDIT will appear on the display.
2
Rotate the EASY JOG/ENTER button to select the AUTO
TRACK submenu.
AUTO TRACK will appear on the display.
3
Press EASY JOG/ENTER to confirm.
ON or OFF will appear on the display.
4
Turn the EASY JOG/ENTER button to select Auto track
ON or OFF.
5
Press EASY JOG/ENTER to confirm.
AUTO TRACK will appear on the display.
6
Press STOP 9 to exit.
During analog and digital recording, you can always insert
track numbers manually by pressing TRACK INCR. on the
remote control.The minimum track length is 4 sec.Track
numbers cannot be changed after recording.
22
EASY JOG
STORE/ME NU CANCEL/D ELETE
PLAY/PAU SE
STOP
OPEN/CLO SE
ENTER
AUDIO CD PLAYBA CK
PROG SHUFFLE DISPLAY SCROLL REPEAT DJ MODE
Tip:
For the best recording results we advise you to first
make a recording onto a CDRW (rewritable) disc.
If for instance you forgot to add track increments or
made another mistake during recording this can
always be corrected.When your recording is complete
and correctly recorded:
- finalize the CDRW disc
- record this disc onto a CDR (recordable) disc, using
the 'Make CD' function. (See paragraph 'Recording
an entire CD')
AUDIO CD PLAYBA CK
Preparing
1
Place an unfinalized CDR(W), absolutely free of scratches
and dust particles in the left CDR tray.
2
Press EXT SOURCE repeatedly until
ANALOG appears on the display.
3
With the CD recorder stopped press TYPE five times to
select REC EXT MAN.
The display shows REC EXT MAN followed by WAIT.
If starts to flash you can insert track
MANUAL
increments manually (AUTO TRACK is set to OFF).
After a few seconds PRESS RECORD followed by the
remaining time and track number appear on the display.
You can record a 3-second silence at the start of a track by
0
pressing PLAY/PAUSE 2; on the CD recorder before
starting the recording.
Recording
4
To start recording, press RECORD on the CD recorder
and immediately start the turntable.
lights continuously.The track number and recording
time will appear on the display.
To interrupt recording, press PLAY/PAUSE 2; on the
0
CD recorder.
starts to flash. Resume at step
5
To stop recording, press STOP 9 on the CD recorder.
UPDATE lights up and
After recording the display will show UPDATE for several
seconds.
Note:With AUTO TRACK OFF, the recording will not stop
automatically.
Finalizing
If you want to play the recorded CD(RW) on a normal
CD player, you must first finalize the disc. Please note that
you cannot add anymore tracks on a finalized CDR.
See Finalizing CDR and CDRW discs.
lights up and
ANALOG
4
.
goes out.