Advertisement
INSTALLATION
NOTE: DO NOT discard
the carton or other packing
materials until you have
inspected the appliance for
hidden damage and tested it
for proper operation.
Refer to SHIPPING DAMAGE
CLAIM PROCEDURE on the
inside front cover of this
manual.
USE A
SPUD
WRENCH
0.25"
0.85" dia.
OR ...
HERE
WHEN
ATTACHING
DRAIN
FITTING
UNPACKING & INSPECTION
Carefully remove the appliance from the carton. Remove all
protective plastic film, packing materials and accessories from the
Appliance before connecting electrical power or otherwise performing
any installation procedure.
Carefully read all instructions in this manual and the Installation
Instruction Sheet packed with the appliance before starting any
installation.
Read and understand all labels and diagrams attached to the
appliance.
Carefully account for all components and accessories before
discarding packing materials. Store all accessories in a convenient
place for later use.
COMPONENTS (quantities vary by model)
Perforated Bottom Plate
Adapter Bar
INSTALLATION
Refer to the Installation Instruction Sheet packaged with each
appliance for cutout dimensions and other installation details.
Counter top must be flat and level. Install supports, reinforcements
and/or stiffeners as necessary in order to maintain counter flatness
SINK
DRAIN
when the appliance is fully loaded.
SPUD
WITH
Apply a generous bead of food-grade silicone sealant to underside of
CROSS
GUARD
mounting flange before setting unit into cutout. Remove any excess
sealant from counter top promptly.
GASKET
Connect the drain pipe to an approved drain. Consult local codes for
NUT
approved drain configurations.
IMPORTANT:
DO NOT allow the sink drain spud to turn during installation. Hold the
spud with an appropriate cross-guard-style spud wrench, or carefully
GRIP
grip the center threaded portion with a strap wrench or slip-joint pliers
to immobilize the drain spud during drain fitting installation.
DO NOT grip the drain spud nut or gasket.
Refer to Cleaning Instructions (page 6). Clean the appliance and
components thoroughly before use.
4
Advertisement
