The Advanced Menu - Siemens SIMATIC Box PC 820 Manual

2.14.2

The Advanced Menu

Menu Structure
Main
COM / LPT Configuration
PCI Configuration
Installed O/S:
Reset Configuration Data:
Floppy disk controller:
Local Bus IDE adapter:
Large Disk Access Mode:
Hard Disk Pre-Delay:
Memory Gap at 15 Mbyte:
Enable Memory ECC:
Default Primary Video adapater: [AGP]
F1 Help
ESC Exit
Figure 2-16
Settings in the Advanced Menu
Installed O/S
Reset
Configuration
Data
Floppy disk
controller
Local Bus IDE
adapter
Large Disk
Access Mode
Siemens Distributor
Box PC 820 / PC FI45 V2, Manual
A5E00051531-03
PhoenixBIOS Setup-Utility
Boot Sequence
Advanced Security Power
[Other]
[Yes]
[Disabled]
[Primary & Secondary]
[DOS]
[Disabled]
[Disabled]
[ECC Scrub]
Select Item + / – Change Values
Select Menu Enter Select
"Advanced" Menu
means that fitted modules are automatically recognized and installed
provided they support plug & play functions.
[Other] The BIOS handles the complete plug & play facilities
[Win98] The operating system handles some of the plug & play
functions
[Yes] All previous functions under Plug & Play are deleted, and
the configuration is retriggered the next time the system is
loaded. The entry is then set to [No]. System components
which have no Plug & Play facilities must be entered
manually.
[No] The system components with Plug & Play facilities are
initialized the next time the system is loaded.
Enable or disable the floppy controller of the basic module.
[Primary]
[Secondary]
[Primary and Secondary]Two IDE interfaces for up to four drives.
[Disabled]
[DOS] The drive tables are designed according to DOS drive
access operations compatible with enhanced IDE.
[OTHER] The tables are not adapted.
Version Exit
Item Specific Help
Peripheral Configuration
F9 Setup Defaults
Sub-Menu F10 Save and Exit
One IDE interface for up to two drives.
No local IDE interface
Motherboard
2-51