Advanced Menu - Siemens SIMATIC PC RI25/45 Technical Description

Motherboard
2.11.2

Advanced Menu

Menu Structure
Figure 2-21 Menu "Advanced"
Settings Plug & Play O/S
Reset Configuration Data
Diskette controller
Local Bus IDE adapter
Large Disk Access Mode
2-44
PhoenixBIOS Setup-Copyright 1985-95 Phoenix Technologies Ltd.
Main Advanced Security
Warning!
Setting items on this menu to incorrect values
may cause your system to malfunction.
PCI Devices
Plug & Play O/S [No]
Reset Configuration Data [No]
Diskette controller: [Enabled]
Local Bus IDE adapter: [Primary & Secondary]
Large Disk Acces Mode: [DOS]
VGA Interrupt: [Enabled]
Memory Gap at 15 Mbyte:
[Disabled]
F1 Help Select Item + / –
ESC Exit Select Menu Enter Select
Power Exit
Item Specific Help
Change Values F9 Setup Defaults
Sub-Menu F10 Previous Values
Plug & Play signifies that built-in modules are
automatically recognized and installed if they
support Plug & Play features.
[No] BIOS provides all Plug & Play features
[Yes] The operating system provides a part of
the Plug & Play features
[Yes] Signifies that any previous installation of
Plug & Play is canceled. The
configuration is reinitiated after the next
system startup. The entry is then reset to
[No]. System components that do not
support Plug & Play have to be defined
manually.
[No] After the next system startup system
components with Plug & Play features
are initialized.
Enables or disables the Floppy controller of the
motherboard
[Primary] One IDE interface for
a max. of two drives
[Primary and Secondary] Two IDE interfaces for
a max. of 4 drives
[Disabled] no local IDE interface
[DOS] The drive tables are configured
according to enhanced IDE
compatible DOS drive access
[OTHER] The tables are not adapted
SIMATIC PC RI25/45, Technical Description
C79000-G7076-C808-01