Starting The Setup Utility; Information Menu - Panasonic FX-55 Series Operating Instructions Manual

Setup Utility
You can make the settings of the computer's operating environment (password settings, startup drive selection, etc.)

Starting the Setup Utility

1. Click (Start) -
2. Click [Restart now] under "Advanced startup"
*1: Screen messages are explained in [English (United States)].
(Depending on the language preference, some screen messages in these instructions are different from the actual screen messages. For
example, [Advanced start-up] may be displayed instead of [Advanced startup] in some language preference.)
3. Click [Troubleshoot] - [Advanced options] - [UEFI Firmware Settings] - [Restart].
The computer restarts, and the Setup Utility screen appears.
When [Enter Password] is displayed, enter your password.
When you start the Setup Utility with Supervisor Password
You can make the settings of all items of the Setup Utility.
When you start the Setup Utility with User Password
Note the following:
In the [Advanced] and [Boot] menus, you cannot make the settings of all items.
In the [Security] menu, you can change only the User Password when [User Password Protection] is set to [No Protection]. You cannot
delete the User Password.
In the [Exit] menu, you cannot make the setting of [Load Default Values] and [Boot Override].
N O T E
Setup Utility screen is displayed on the internal LCD even when an external display is connected to the computer as the factory
n
default. However, if the LID (display) is closed, it will come to be displayed on an external display.

Information Menu

Language
Product Information
Model No
Serial No
Expansion Areas
Sub-menu (Expansion Areas)
Rear Expansion Area
Model No
Serial No
(Settings) - [Update & Security] - [Recovery].
*1
.
Underlined items are the factory presets.
English
French
Japanese
Computer information (cannot be changed.)
Enter the sub-menu.
Computer information (cannot be changed.)