Toro Workman GTX Series Installation Instructions Manual page 5

Installing Stake Sides
Optional
To install the optional stake sides, you need the following measurements and quantities of wood:
Wood Dimensions
38 x 89 mm (2 x 4 inch)
29 x 140 mm (5/4 x 6 inch)
You also need the following hardware:
Hardware
Button-head bolt (5/16-18 x 3 inches)
Button-head bolt (5/16-18 x 2-1/2 inches)
Flanged nyloc nut (5/16-18 inch)
Your structure should appear as follows:
1. 29 x 140 mm (5/4 x 6 inch) board
2. Front of the structure—ensure that the boards are oriented
as shown.
Total Length of Each Board
36 cm (14 inches)
117 cm (46 inches)
Use
Mounting the 29 x 140 mm (5/4 x 6 inch)
boards to the 38 x 89 mm (2 x 4 inch)
boards
Mounting the 38 x 89 mm (2 x 4 inch)
boards to the bed
Securing the hardware
Figure 11
3. 38 x 89 mm (2 x 4 inch) board
5
Quantity Needed
8
8
Quantity Needed
32
16
48