Selecting The Colour System That Corresponds To Your Tv; Step 3: Setting The Speakers' Channels - Philips LX3600D/BK User Manual

Getting Started
Selecting the colour system that
corresponds to your TV
This DVD system is compatible with both
NTSC and PAL. In order for a DVD to
play on this DVD system, the colour
system of the DVD, the TV and the DVD
system should match.
1
Stop playback (if any) and press SETUP.
2
Press 2 twice to select 'Video Setup
Page'.
3
Press 3 4 to highlight 'TV Type'.
4
Enter its submenu by pressing 2.
5
Move the cursor by pressing 3 4 to
highlight one of the option below:
Multi – Select this if the connected TV is
compatible with both NTSC and PAL
(multi-system). The output format will be
in accordance with the video signal of the
disc.
NTSC – Select this if the connected TV
is NTSC system. It will change the video
signal of a PAL disc and output to NTSC
format.
PAL – Select this if the connected TV is
PAL system. It will change the video signal
of an NTSC disc and output to PAL
format.
6
Select an item and press OK.
To remove the menu
Press SETUP.
16
Step 3: Setting the speakers'
channels
You can adjust the delay times (centre
and surround only) and volume level for
individual speakers. These adjustments let
you optimise the sound according to your
surroundings and setup. Speaker settings
are only active on Multi-channel audio
outputs.
1
Stop playback (if any) and press SETUP.
2
Press 2 to select 'Audio Setup Page'.
3
Press 3 4 to highlight the 'Speaker
Setup'.
4
Enter its submenu by pressing 2.
5
Press 3 4 to select (Front L&R, Center,
Surr L&R, Sub Woofer), then press
enter the speaker setting menu.
6
Use to select the settings for each
3 4
speaker that suit your surround sound
needs, which may includes :
Delay time settings - use the longer
delay settings when the surround
speakers are closer to the listener than
the front speakers.
Adjusting the volume levels for one or
both speakers until the sound evens.
The test tone will be automatically
generated.
7
Press OK to confirm.
To remove the menu
Press SETUP.
to
2