Advertisement
Recalibrate the Sub
After initial setup, you may wish to make some adjustments to optimize your Sub's performance. If you move the
Sub to another location, purchase new speakers, or simply want to adjust the sound, follow the steps below to
recalibrate the Sub. You can only do this with an Android device.
1. Touch
> Settings > Room Settings.
2. Select the room that is associated with the Sonos Sub. It appears as Room (+Sub) in Room Settings.
3. Select Advanced Audio > Recalibrate Sub.
4. Follow the prompts to optimize your Sub's performance:
Select the size of your stereo speakers (Connect:Amp only).
Press Play
louder or B is louder.
Press Play
Pair Sub with a different speaker
You can easily pair Sub with a different Sonos speaker (any except the Sonos Connect).
If you are moving Sub to a new room, wait for the status light to stop flashing after you plug it back in.
1. Select
> Settings > Room Settings.
2. Select the room that is currently associated with the Sonos Sub. It appears as Room (+Sub) in Room
Settings.
3. Select Remove Sub.
4. Choose one of the following settings:
If you want to pair the Sub with a different Sonos speaker, select Choose Room for Sub.
If you're not going to use the Sub right now, select Don't use Sub. It will appear on Rooms as Sub (unused)
until you pair it with another Sonos speaker.
to compare the volume of two test sounds, A and B, and then select No Difference, A is
to listen to a test sound, and then select the level you prefer.
Advertisement
