Advertisement
If you're placing Sub horizontally on a floor, you can attach permanent felt feet (included) to protect your floor. If
you're putting it on a rug or using it vertically, no need to adhere the felt feet.
Note:The felt feet are not removable—a strong adhesive will keep them permanently attached to the Sub.
1. Lay the Sub down so the Sonos logo is facing down. Make sure you adhere the felt feet to the side that
doesn't have the Sonos logo.
2. Place the enclosed guide on one corner of the unit and fold the flaps over the edge.
3. Peel the backing off one of the feet.
4. Press the felt foot (sticky side down) onto the unit inside the circular portion of the guide.
5. Attach the other 3 felt feet the same way.
Connect the cables
Attach the power cord and plug in the Sub. Be sure to push the power cord firmly into the Sub until it is flush with
the surface.
Advertisement
