LED
Status
LINK/
On
ACT
Blinking
Off
5 Wall Mounting (optional)
See the product specifications for the size of screws to
use and how far apart to place them.
1 Locate a high position on wall that is free of
obstructions. Use a sturdy wall.
2 Drill two holes for the screws. Make sure the distance
between the centers of the holes matches what is
listed in the product specifications appendix.
3 Do not screw the screws all the way into the wall.
Leave a small gap of about 0.5 cm between the heads
of the screws and the wall.
Description
The port is connected to an Ethernet
network.
The port is receiving or transmitting data.
The port is not connected to an Ethernet
network.
Be careful to avoid damaging pipes or
cables located inside the wall when drilling
holes for the screws.
ENGLISH
4