Using The Enspire Controller App; Idc Registration - Yamaha Disklavier ENSPIRE DKC-900 Owner's Manual

Using the ENSPIRE Controller App

 Installing the App
To connect your smart device to this product, you must install the ENSPIRE
Controller app to your smart device.
For details, search for "ENSPIRE Controller" on the App Store or Google
Play.
For the ENSPIRE Controller app functions and operation instructions, refer to
the Disklavier ENSPIRE Controller operation manual. The ENSPIRE
Controller operation manual is located on the Information page within the
ENSPIRE Controller app.
You can also download it from the website below.
https://download.yamaha.com/
 Connect a smart device to this product
After you have connected your smart device to a network, open the ENSPIRE
Controller app and select this product from the list. Tapping this product
name will open the control screen of that Disklavier.

IDC Registration

To use the IDC service, initial registration is required using an Internet-
connected computer.
Please register at the following website:
https://member.yamaha.com/myproduct/regist/
Once you have an IDC account, you will interact with that account using the
ENSPIRE Controller app. To use the full IDC service, you are required to
enter your registered ID (e-mail address) and password on the ENSPIRE
Controller app.
Getting Started
Note:
• The application supports iOS and
Android devices.
• For details on the application, refer
to the description on the download
site.
Note:
• If you have already registered for
the IDC service with any other
instrument, you do not need to
register again. You can use your
ID and password obtained through
that registration.
• Some IDC service functions do not
require an ID and password.
Chapter
2
25