Yamaha Disklavier ENSPIRE DKC-900 Owner's Manual page 16

Chapter
1
Introduction
 Switch Box (Rear Panel)
1 [AUTO PLAY] switch
For activating or deactivating the auto play function.
If you leave the switch set to "ON," playback
automatically starts when the power is turned on.
(Default setting: OFF)
2 [AUTO OFF MODE] switch
When this is turned on, this product will turn off
automatically if the following conditions continue for
a certain period of time. (Default setting: ON)
• No operation has been performed on the switch
box.
• No operation has been performed on the
ENSPIRE Controller app.
• The keyboard has not been played.
• This product has not received the MIDI data.
Note:
You can change the automatic turn off time with the ENSPIRE
Controller app.
Functions that can be operated by Switch Box
The functions that can be operated with the Switch Box are only power on/off, song playback/pause, and
volume control of acoustic piano/internal electronic sound source (page 15). The other functions are
controlled only from the application of your smartphone or tablet.
10
1 2 3 4
3 [MAINTENANCE] button
For service personnel only. Do not touch this button.
4 [USB] terminal
Used to connect the USB wireless LAN adaptor
(UD-WL01).
Note:
This product cannot detect the USB flash drive if two or more
memory devices are connected at the same time.
5 [WLAN] switch
For setting the method for wireless LAN connection
when connecting the USB wireless LAN adaptor to
the [USB] terminal. See "Connecting the Product
and Smart Device to a Network" on page 18.
(Default setting: RT)
5