Yamaha Disklavier ENSPIRE DKC-900 Owner's Manual page 22

Chapter
2
Getting Started
 Setting the Auto Off Function
You can turn the power off automatically if you do not use the product for the
time specified with the ENSPIRE Controller app.
1
Set the [AUTO OFF MODE] switch on the rear of the switch
box.
Setting
ON
OFF
16
Description
The auto off function is activated. The product is automatically
turned off if you do not use it for the time specified with the
ENSPIRE Controller app.
The auto off function is deactivated. Use the [P] (Standby/On)
button to turn the power off.
Note:
When set to ON, this product
automatically turns off under the
following conditions:
• No operation is performed on the
switch box.
• No operation is performed on the
ENSPIRE Controller app.
• The keyboard is not being played.
• This product does not receive the
MIDI data.