Philips HTS9810/12 Quick Start Manual page 48

Sound
No sound.
No sound on HDMI
connection.
No sound from TV
programmes.
Interference on rear
wireless speakers or
existing wireless network in
your home.
No sound from rear
wireless speakers.
Play
DivX video fi les cannot be
played.
DivX subtitle are not
displayed correctly.
The contents of the USB
fl ash drive cannot be read.
EN
48
• Ensure that the audio cables are connected and press the
correct input source (for example, AUX/DI /MP3 LINK, USB) to
select the device you want to play.
• You may not hear any sound from the HDMI output if the
connected device is non-HDCP compliant or only DVI-
compatible.
• Ensure that the [ HDMI Audio ] setting is turned on.
• Connect an audio cable from the AUDIO input on this unit to
the AUDIO output on your TV. Then press AUX/DI /MP3
LINK repeatedly to select the corresponding audio input source.
• Switch to another frequency channel.
1. Press OPTIONS.
2. Select [ Audio Setup ] > [ Wireless ] > [ Switch Channel ]
in the menu, then press OK.
3. Select a channel option, then press OK.
• Check if all the connections to the wireless speakers are
properly connected and connect the power cable.
• Press AMBISOUND to turn on the Ambisound mode.
• See chapter 'Getting Started - Optimise wireless transmission'
for proper wireless setup.
• Ensure that the DivX fi le is encoded according to the 'Home
Theatre Profi le' with the DivX encoder.
• Ensure that the DivX video fi le is complete.
• Ensure that the subtitle fi le name is the same as the movie fi le
name.
• Select the correct character set. See chapter 'Adjust Settings -
Preference Setup - [ DivX Subtitle ]'.
• The USB fl ash drive format is not compatible with this unit.
• Drive is formatted with different fi le system which is not
supported by this unit (e.g. NTFS).
• Maximum size of memory supported is 160GB.