Philips HTS9810/12 Quick Start Manual

3 Enjoy
EasyLink control
This feature is only applicable if this DVD Home Theatre
unit is connected to HDMI CEC compliant TV/device
using HDMI cable. It enables all the linked devices
response or react to certain commands simultaneously
with one touch control.
Satellite Receiver /
Cable Box
HDMI
HDMI CEC
HDD / DVD Recorder
TV
AUDIO
HDMI AUDIO
Subwoofer
Junction box
A
Turn on the HDMI CEC operations on your TV and
other connected devices. See TVs/devices manual for
details.
B
You can now enjoy the EasyLink controls.
One touch play [ Auto Wake-up TV ]
A
Press PLAY.
It turns on this unit and start disc play (if a video disc
is detected), and your TV automatically turns on and
switches to the correct viewing channel.
Note This is only possible if this unit is in standby
mode. If this unit is in active mode, you have to press
DISC followed by PLAY to start disc play.
One touch power off [ System Standby ]
Press and hold 2.
A
It turns off all linked devices.
Note This unit responses to standby command from
other HDMI CEC compliant TV/devices.
Need help?
User Manual
See the user manual that came with your Philips DVD Home Theater System.
One touch audio input switching
This unit is able to render the audio signals from the
active source and switch automatically to the
corresponding audio input.
Before you can enjoy this feature, connect audio cables
from this unit to your TV/devices and follow the
instructions below to map the audio inputs to the
connected devices.
A
Press DISC.
B
Press OPTIONS.
C
Press B.
D Select [ EasyLink ], then press B.
General Setup
EasyLink Auto Wake-up TV
Disc Lock System Standby
Display Dim System Audio Control
OSD Language
Audio Input Mapping
Screen Saver
Sleep Timer
Standby Mode
DivX(R) VOD Code
E
Select [ System Audio Control ] > [ On ], then
press OK.
F
Select [ Audio Input Mapping ], then press OK.
G
Select [ OK ] in the menu, then press OK to start
scanning of devices.
H
When scanning complete, select the audio input of
this unit that is used to connect to your TV/device
(e.g. AUX1 Input), then press B.
I
Select the TV/device (appeared in its brand name)
in the right panel, then press OK.
J
Repeat steps 8~9 to map other connected devices.
K
To exit the menu, press OPTIONS.
Note Philips does not guarantee 100%
interoperability with all HDMI CEC compliant devices.
2008 C Philips Consumer Lifestyle
All rights reserved.
12nc: 3139 245 30981
sgpjp_828/12-eng1
Register your product and get support at
www.philips.com/welcome
Quick Start Guide
What's in the box?
Junction Box
DVD Home Theatre (main unit) Velcro strip
(for Junction Box)
Subwoofer
1 centre, 2 front and 2 rear
Interconnect cable
speakers
(between Junction Box
and Subwoofer )
HTS9810
1
Connect
2
Set up
3
Enjoy
Optional cables
User
(not required for basic
Manual
connection)
3.5mm stereo audio
Remote Control Micro fi bre
cable (for MP3 LINK)
and 2 batteries cleaning cloth
Software cable
2x Power cables Scart cable
FM wire antenna
HDMI cable