Welcome
The next few steps will help you set up your
Home Theater System to match your
listening environment.
To optimize the Ambisound surround effect for your
home, please begin with this simple setup.
Stop: Exit
•
To skip the Ambisound setup, press x
to exit.
4 4
Press B to continue.
[ Room Acoustics ] menu is displayed.
Room Acoustics
Please select the type of walls that surround
your room:
Hard (Concrete, wood)
Soft (Curtains, open space)
Back
Change
5
Select the condition of the room, then
press B.
[ Rear Speaker Placement ] menu is
displayed.
Rear Speaker Placement
Select the placement of the rear speakers
in your room:
Against both wall (<0.5m)
Against both wall (>0.5m)
Against side wall (>0.5m)
Against back wall (>0.5m)
Back
Change
20
EN
6
Select the rear speakers placement in the
room, then press B.
7
The speaker setting is complete, press B to
exit.
This DVD Home Theatre unit is now ready for
use.
Continue
•
To change the menu display language, see chapter
'Adjusting settings' - [ General setup ] > [ OSD
Language ] for details.
•
If you connect this unit to a HDMI CEC compliant
TV using a HDMI cable, it switches automatically to
the menu display language as per your TV setting.
Select
Select
Tip