Motorola PATX3070 Series Installation And Use Manual page 44

Hardware Preparation and Installation
1
Use ESD
Wrist Strap
1-30
Attach an ESD strap to your wrist. Attach the other end of the ESD strap
to an electrical ground. (Note that the system chassis may not be grounded
if it is unplugged.) The ESD strap must be secured to your wrist and to
ground throughout the procedure.
1. To remove the battery from the module, carefully pull the battery
from the socket.
2. Before installing a new battery, ensure that the battery pins are
clean.
3. Note the battery polarity and press the new battery into the socket.
Note
When the battery is in the socket, no soldering is required.
4. Recycle or dispose of the old battery according to local regulations
and manufacturer's instructions.
Computer Group Literature Center Web Site