Advertisement
Operation of Officer of the Watch (OOW)
Reset operation
- Before a dormant period is finished, push the button for reset of
dormant period.
- Any other key press will also cause reset.
Alarm state
Since alarm is generated when the
screen, choose [ALARM], and check the state of alarm.
Alarm information
AC FAIL
DC FAIL
SYSTEM FAIL
Call functions
When required, various call functions are used.
EM'CY CALL
OFFICER CALL
icon is displayed on the LCD lower part, press a
The state of AC power supply is displayed.
The state of a DC power supply is displayed.
The state of a BNWAS system is displayed.
An emergency call is initiated by pressing a
All the audible alarm unit start sounding.
An officer call is initiated, when a
[OFFICER CALL] is chosen.
The audible alarm units of the room set to the bridge and the backup officer sound.
key or the reset button unit, and reset a
key for 2 seconds.
key is pressed, a menu screen is displayed and
-ii -
key, display a menu
Advertisement
