Product Features; Setup - Compaq S500 User Manual

PRODUCT FEATURES

The convenient and user-friendly on-screen display allows for
•
easy and accurate adjustments of horizontal and vertical screen
size and position, geometry, and screen color.
The monitor supports a safe working environment in strict
•
compliance with the MPR II standard for low emissions.
The monitor complies with the VESA Display Data Channel
•
(DDC) specification for Plug and Play compatibility. Advanced
microcircuitry makes setup and configuration fast and effortless.
The monitor features Advanced Color Controls for fine-tuning to
•
meet your own personal tastes or application requirements. Use
the on-screen controls to adjust the color temperature and RB
gain value for the best possible screen color and intensity.
Activate the higher refresh rates of the monitor to stabilize the
•
screen and eliminate the annoying flicker that contributes to eye-
strain and headaches.
The "borderless" full-screen display capability works under all
•
graphic modes and provides a larger viewing area than
conventional monitors, giving you a better picture with more
workspace.
2

SETUP

INSTALLING THE TILT/SWIVEL STAND
1. Ensure that the power is off to the monitor.
2. Set the monitor face down with the underside facing you. Please
be careful not to scratch the monitor screen.
3. Align the four hooks on the stand with the guide holes on the
bottom chassis of the monitor.
4. Insert the hooks into the guide holes.
5. Slide the tilt/swivel stand toward the front of the monitor until the
latch locks in position.
6. Turn the monitor and the stand upright.
Removing the tilt/swivel stand
If you want to remove the tilt/swivel stand on the monitor, press the
latch and pull the tilt/swivel stand toward the back of the monitor.
Lift the stand to separate.
PUSH
PUSH
3