Dst Configuration - Siemens SCALANCE W780 Configuration Manual

5.5.12.3

DST Configuration

On this page, you can configure the entries for the daylight saving time changeover. As
result of the changeover to daylight saving or standard time, the system time for the local
time zone is correctly set.
You can define a rule for the daylight saving time changeover or specify a fixed date.
Settings
Note
The content of this page depends on the selection in the "Type" box.
The boxes "DST No", "Type" and "Name" are always displayed.
● DST No
Select the type of the entry.
● Type
Select how the daylight saving time changeover is made:
– Date
– Recurring
● Name
Enter a name for the entry.
The name can be a maximum of 16 characters long.
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 03/2015, C79000-G8976-C267-08
You can set a fixed date for the daylight saving time changeover.
This setting is suitable for regions in which the daylight saving time changeover is not
governed by rules.
You can define a rule for the daylight saving time changeover.
This setting is suitable for regions in which the daylight saving time always begins or
ends on a certain weekday.
Configuring with Web Based Management
5.5 "System" menu
185