Iref Wds List - Siemens SCALANCE W780 Configuration Manual

Simatic net industrial wireless lan to ieee 802.11n web based management
Hide thumbs Also See for SCALANCE W780:
Table of Contents

Advertisement

Configuring with Web Based Management
5.4 "Information" menu
5.4.13.2

iREF WDS List

The WBM page shows the access points logged on to the access point via a WDS link. This
page shows information such as the antenna used and the signal strength of the WLAN
interface.
Note
• This tab is available only in access point mode.
• This WBM page can only be configured with the following KEY-PLUG:
– Access point: W780 iFeatures (MLFB 6GK5 907-8PA00)
Description
The page contains the following box:
● Connected WDS Partners
Shows the number of access points logged on to the access point
The table has the following columns:
● Radio
Shows the available WLAN interfaces.
● Port
Shows the WDS interface.
● BSSID
Shows the MAC address of the WDS partner.
● WDS ID
Shows the name of the WDS partner.
● Tx Chain
Shows the antenna connector over which the two access points communicate with each
other.
● Signal Strength [dBm]
Shows the signal strength of the connected access point in decibel milliwatts.
● Signal Strength [%]
Shows the signal strength of the connected access point as a percentage.
134
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 03/2015, C79000-G8976-C267-08

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents